Setup : OB1 flow controller + Mux Wire + Valves 3/2
A microfluidic valve controller gives you a total freedom to add up to 16 valves and put them anywhere in your set-up and control them independently and simultaneously. Thanks to this instrument, this application note will explain how to make an efficient microfluidic lane switch.
The MUX WIRE is a microfluidic valve controller for deported valves. It is a smart way to automate your setup as the valve can be located at any given point. Each valve is connected individually to the MUX WIRE through small WR-MPC3 connectors, facilitating the design of new microfluidic setup.
On the following experiment, we showcase how one 3/2 valves and one on/off valve can be used along with a two channel OB1 MkIII controller.
The 3/2 valves being positioned right after the two reservoirs allow fast switches (20ms) between the green and red fluid and then the 2/2 valve allows fast opening and closing.
You have the possibility to use your own valves 24V (see spec) depending on your needs and specific constraints, giving maximum flexibility to easily change or develop new microfluidic setup. You just need to link them to small WR-MPC3 connectors. Feel free to contact us for advice on how to best use your microfluidic valve controller.
With the MUX WIRE, you can easily control your microfluidic valves. You can use our 2-way or 3-way valves or plug your own ones. Each valve is connected individually on the MUX WIRE through small WR-MPC3 connectors, facilitating the design of new microfluidic setup thanks to the microfluidic valve controller.
The MUX WIRE allows you to plug and control valves through our software interface. We provide different valves dedicated to microfluidics but you can plug your own valves 24V (see spec)based on your needs, giving maximum flexibilty to easily change or develop new microfluidic setups.
This section will explain how to perform a flow redirection using the MUX Wire microfluidic valve controller, and 2 and 3 ways valves using the Elveflow® smart interface software. First make sure you have all the instruments you need, including the tubings and the microfluidic connectors.
OB1 MK3+ Flow Controller
Sample Reservoirs
Valves 3.2 or 2.2
Mux Wire
*The MUX WIRE features an IN/OUT trigger to synchronize itself with other instruments.
The user friendly ESI guarantees total control and automation of your experiment. It is in particular easy to launch sequences that calls several instruments, such as a microfluidic valve controller, as shown here.
1) One-click valve control
Our software allows to manage each valve independently with a simple click, giving you a complete real-time control over your experimental set-up.
2) Automatic control of the valves
You can also create complex opening/closing sequences via our scheduler. In this way, you can synchronize your instruments between them or trigger* a given action when a user-defined condition is verified.
You can now control up to 16 valves with your microfluidic valve controller and use this functionality to have flexible and highly automatically controlled set-up ! Thanks to the ESI, you can interface the mux wire with all the other instruments provided by Elveflow®.
Email* Message
Newsletter subscription I hereby agree than Elveflow uses my personal data
Do you want tips on how to best set up your microfluidic experiment? Do you need inspiration or a different angle to take on your specific problem? Well, we probably have an application note just for you, feel free to check them out!
Learn how to set up your development environment for Elveflow products with this comprehensive tutorial.
This user guide will show you how to run microfluidic colocalization studies of single molecule spectroscopy.
Study the impact of molecular transport on cell cultures with a cross flow membrane chip and microfluidic instruments.
Precise liquid injection system for manipulation of small volumes of fluids using the MUX distribution and the MUX recirculation valve.
This application note explains how to set up a robust and reproducible microfluidic platform for liposomes assembly with improved encapsulation efficiency and reduced polydispersity in size.
Single-wall carbon nanotubes (SWCNTs) are considered as quasi 1-dimensional (1D) carbon nanostructures, which are known for their outstanding anisotropic electronic, mechanical, thermal and optical properties.
This application note describes how to combine and synchronise liquid perfusion and imaging using an Olympus spinning disc confocal microscope together with an Elveflow pressure-driven flow controlled microfluidic system.
Mixing is a crucial step for several microfluidic applications like chemical synthesis, clinical diagnostics, sequencing and synthesis of nucleic acids
This application note describes how microfluidic can be employed as a nanoparticle generator based on the example of PLGA bead generation.
Learn how to perform PLGA nanoparticle preparation with Elveflow instruments and a microfluidic chip
This application note explores the basic principle of pneumatic pumps and a flow controller based on the basic principle of pneumatic pumps, known as pressure driven flow control. It also demonstrates the applications of pressure driven flow control in a range of industrial & research fields.
The application note describes how to convert various units of shear stress and/or pressure from one to another: shear stress conversion from Pascal, atmosphere, and N/m²...!
The application note describes how to convert various units of viscosity from one to another: viscosity conversion from Poise, Pa.s, Dyn.s/cm²...
Elveflow's developped a microfluidic resistance calculator dependent upon the microfluidic system from the flow rate, the device, the tubing to your fluid properties.
Get a quote
Name*
Email*
Message
Newsletter subscription
We will answer within 24 hours
By filling in your info you accept that we use your data.
Collaborations
Need customer support?
Serial Number of your product
Support Type AdviceHardware SupportSoftware Support
Subject*
I hereby agree that Elveflow uses my personal data Newsletter subscription
How can we help you?
Message I hereby agree that Elveflow uses my personal data Newsletter subscription