The first autonomous high accuracy microfluidic flow control system

No more air line or air compressor

A transportable microfluidic flow control system.

High precision microfluidic flow control system

A flow control system with an accuracy of 100 µbar.

Small response time and no pulsation flow

A microfluidic flow control system which allows flow switch in less than 1 second.

Microfluidic flow control system specifications

Autonomous: A flow control system including a  pressure pump, no need for compressor/gas line.

Transportable: weight  1.2kg, small size: 15x15x20 cm.

Quick setup:  Install your flow control system in 5 min for the first installation, setup a new experiment in 2 minutes.

Accurate: Flow control in microfluidic devices with precision down to 100µbar  ( 0.0145 psi )

USB control option: Control flow in your microfluidic chip with your computer using Elveflow® proprietary software (optional)

Four independent outlets flow control system: Get four independent outlets for your pressure control (optional)

Both pressure and flow rate control and monitoring: No more need to choose between pressure control or flow rate control

Intuitive and standalone microfluidic flow control system: Plug and play setup

Depending on the type of fluid you want to control in your microfluidic device (liquid or gas), there are two ways to setup your microfluidic flow control system:

Liquid flow control in microfluidic devices:

(examples: droplets generation, cell culture medium renewal)

Step 1: Connect your Elveflow® microfluidic flow control system to an electric source

Step 2: Turn ON your Elveflow® microfluidic flow control system

Step 3: Connect the Elveflow® microfluidic flow control system to a liquid tank with capillary tubing

Step 4: Connect the liquid tank and microfluidic device with a capillary

Step 5: Set pressure using the knob of your Elveflow® microfluidic flow control system

Step 6: Switch ON the outlet valve of the Elveflow® microfluidic flow control system

Turn the button when you want to adjust the pressure in your microfluidic device

Flow control of gas in microfluidic device:

Step 1: Connect your Elveflow® microfluidic flow control system to an electric source

Step 2: Turn ON your Elveflow® microfluidic flow control system

Step 3: Connect the Elveflow® microfluidic flow control system and microfluidic device with capillaries*

Step 4: Set pressure using the knob of your Elveflow® microfluidic flow control system

Step 5: Switch ON the outlet valve of the Elveflow® microfluidic flow control system

Turn the button when you want to adjust the pressure in your microfluidic device.