The first autonomous high precision microfluidic pump

microfluidic pressure pump

Obsolete

See the new product page:

PLEASE SEE OUR UPDATED WEBPAGE HERE


Accurate: A microfluidic pump with precision down to 100 µbar  ( 0.0145 psi ).

Autonomous microfluidic pump: Includes a  pressure pump and a pressure controller, no need for compressor/gas line.

Transportable: Weight  1.2kg, small size : 15x15x20 cm.

Quick setup:  Install your microfluidic pump in 5 min for the first installation, setup a new experiment in 2 minutes.

USB control option: Control flow in your microfluidic chip with your computer using Elveflow® proprietary software (optional).

Microfluidic pump with 4 independent outlets: Get four independent outlets for your pressure control (optional).

Both pressure and flow rate control and monitoring : No more need to choose between pressure control or flow rate control.

.

A microfluidic pump including a micropump and a pressure controller in the same device.

 

microfluidic pump no air line

No more air line or air compressor

A transportable  microfluidic pump to avoid common air pressure facilities

.

microfluidic pump response timePrecise pressure pump

A microfluidic pump with an accuracy of 100µbar

.

microfluidic pump system high precision

Small response time and no pulsation flow

Contrary to syringe pumps, Elveflow® microfluidic pressure pumps do not oscillate and allow changing flow rate in microfluidic devices in less than one second

 

Install a microfluidic experiment in five minute with Elveflow® pressure pump:

 

The following steps show you how to setup a microfluidic experiment using Elveflow®  microfluidic pressure pumps.

There are two protocols depending on your type of fluid : gas or liquids
.

If you need to control pressure of gas in your microfluidic device :

Step 1:  Link the Elveflow® microfluidic pressure pump to an electric plug.

Step 2: Switch the power button on the right side of the Elveflow® microfluidic pressure pump.

Step 3: Connect the pressure pump and the microfluidic device. (for most convenient plugging see our microfluidic connection kit).

Step 4: Set the desired pressure using the knob of your Elveflow® microfluidic pressure pump.

Step 5:  In  order to deliver the pressure inside the microfluidic device switch ON the outlet valve of the Elveflow® microfluidic pump.

If you want to change the pressure inside your chip, just turn the knob of your Elveflow® microfluidic pump to adjust it.
.

If you need to control pressure of liquids in your microfluidic device :

(examples of applications : droplets generation, cell culture medium renewal)

Step 1:  Link the Elveflow® microfluidic pressure pump to an electric plug.

Step 2: Switch the power button on the right side of the Elveflow® pressure pump.

Step 3 : Connect the Elveflow® microfluidic pump to a liquid tank.

Step 4 : Connect the liquid tank and the microfluidic device.

Step 5 : Set the desired pressure using the knob of your Elveflow® pressure pump.

Step 6 : In  order to deliver the pressure inside the microfluidic device switch ON the outlet valve of the Elveflow® pressure pump. If you want to change the pressure inside your chip, just turn the knob of your Elveflow® pressure pump to adjust it.

Obsolete

See the new product page:

PLEASE SEE OUR UPDATED WEBPAGE HERE


 

WORLD LEADER IN HIGH PERFORMANCE MICROFLUIDIC FLOW CONTROL

We  provide the only microfluidic flow control system using Piezo technology that enables a blazing fast flow change in your microdevice.

Piezo electric microfluidics flow control