MFR - MICROFLUIDIC FLOW READER
Measure the exact flow rate provided by your system
A device specifically designed to be used with our pressure or flow sensor for measurements inside your microchannels. The sensor reader can be used to monitor flow rate from any type of flow control instrument (syringe pump, peristaltic pump, perfusion, pressure controller).
Connect the sensor reader to your computer via USB and monitor the flow rate using the Elveflow® Smart Interface.
You can connect your microfluidic sensor either to the sensor reader or directly to the Elveflow microfluidic flow controller (which already integrates a flow reader).
Get Quote or Technical Information
(We will answer within 24 hours)
FLOW READER FOR HIGH PRECISION MICROFLUIDIC FLOW SENSING
The exceptional qualities of these MFS flow sensors (40 ms response time, resolution down to 1,5 pL/s) enables you to conduct extremely subtle experiments requiring a very high level of technical expertise.
Monitor low liquid flow rate in your microfluidic setup.
Our liquid pressure sensors can be used with Flow reader for monitoring pressure in the Elveflow® software. Our Smart Interface enables you to control your setup after a few minutes of training.
Our sensor reader achieve resolution rates as low as 1.5 pL/s, accuracy levels down to 0.15% of the full scale and response times down to 40 ms.
- Resolution down to 1,5 pL/s
- Response Time 40 ms
- 5 ranges from 1.5 µL/min to 5 mL/min
- Fully compatible with other Elveflow instruments
- Bi-directional flow rate measurement (positive & negative)
Plug and Play flow control
«Plug & Play Microfluidics» is not just a motto to us. Users will benefit from a control algorithm that ensures an extremely sensitive and responsive flow rate regulation, while being very simple to operate.
Microfluidic flow sensor (*optional)
You can plug our liquid flow sensors anywhere within your microfluidic setup, record the flow rate on your computer and adjust the flow using our pressure pumps. Our flow sensors can be plugged directly into our standalone flow reader.
Microfluidic pressure sensor (*optional)
Get high accuracy flow through sensors for high accuracy pressure measurement and dead volume as small as 7.5 µL. Our liquid pressure sensors are furnished with an M8 electrical connection and can be used with Sensor reader for monitoring pressure in the Elveflow® software.
The following table summarizes the main features of the Elveflow® MFS Microfluidic Flow Sensor.
5 ranges of flow sensor are available
USB software module
Thanks to an intuitive interface, the Elveflow® Smart Interface enables the use of Elveflow® instruments from the simplest commands for beginners to the most complex manipulations for experts… read more
Control your experiments through C, Python, Matlab®, Labview® or the Elveflow® Smart Interface. The Elveflow® Smart Interface is a software application offering all the functionalities that microfluidicists need.
Elveflow® offers you two optional module:
1 – Microfluidic flow sensor
2 – Microfluidic pressure sensor
1. FLOW READER
Connect the flow reader to your computer via USB and monitor the flow rate using the Elveflow® Smart Interface.
2. FLOW SENSOR
Place the flow sensors anywhere you want on your fluidic path and electrically connect flow sensors to your flow reader .
3. CHIP / CAPILLARY
Thanks to their small footprint, flow sensors can be put anywhere within your fluidic system.