MPS - MICROFLUIDIC PRESSURE SENSOR
Get high accuracy flow through sensors for high accuracy pressure measurement and internal volume as small as 7.5 µL
Elveflow® provides its customers high accuracy pressure sensor adapted to liquids and compatible with 3/32 ID tubing (Large package version) or 10-32 fittings for 1/16 OD tubing (Small package version). Our liquid pressure sensors are furnished with an M8 electrical connection and can be used with MSR – Microfluidic Sensor Reader for monitoring pressure in the Elveflow® software.
The unique design of the small package version has been optimised to remove dead volume and for low internal volume which makes it a perfect choice for microfluidic applications.
Get Quote or Technical Informations
(We will answer within 24 hours)
MEASURE AND CONTROL PRESSURE ANYWHERE IN YOUR SETUP
Our pressure sensors work as Gauge pressure sensors, measuring positive and negative pressure relativly to atmospheric pressure. Several pressure ranges are available from 1 psi (70 mBar) to 100 psi (7 bar).
Monitor low liquid flow rate in your microfluidic setup.
Our liquid pressure sensors can be used with our Sensor Reader for monitoring pressure in the Elveflow® software. Our Smart Interface enables you to control your setup after a few minutes of training.
- Accuracy down to 0.2 % Full Scale
- 5 ranges from 1 psi (70 mBar) to 100 psi (7 bar)
- No dead volume
- Ultra small internal volume of 7.5 µL on small package version
- 20 ms Settling time
- Compatible with gas and liquids*
- Interactivity with other Elveflow instruments
* Limited only to media compatible with polyetherimide, silicon, and fluorosilicone seals
Plug and Play flow control
«Plug & Play Microfluidics» is not just a motto to us. Users will benefit from a control algorithm that ensures an extremely sensitive and responsive flow rate regulation, while being very simple to operate.
MSR - MICROFLUIDIC SENSOR READER
MONITORING AND FEEDBACK CONTROL MODULE (OPTIONAL)
A device specifically designed to be used with a pressure sensor for pressure measurements inside your microchannels. The Sensor reader can be used to monitor pressure from any type of flow control instrument (syringe pump, peristaltic pump, perfusion, pressure controller).
The following table summarizes the main features of the Elveflow® MPS Microfluidic Pressure Sensor.
5 ranges of Pressure Sensor are available
USB software module
Thanks to an intuitive interface, the Elveflow® Smart Interface enables the use of Elveflow® instruments from the simplest commands for beginners to the most complex manipulations for experts… read more
Control your experiments through C, Python, Matlab®, Labview® or the Elveflow® Smart Interface. The Elveflow® Smart Interface is a software application offering all the functionalities that microfluidicists need.
1. FLOW READER
Connect the flow reader to your computer via USB and monitor using the Elveflow® Smart Interface.
2. FLOW SENSOR OR PRESSURE SENSOR
Place the sensors anywhere you want on your fluidic path and electrically connect sensors to your flow reader.
3. CHIP / CAPILLARY
Thanks to their small footprint, sensors can be placed anywhere within your fluidic system.